Floor Strip & Seal Gold Coast
Floor Stripping Gold Coast
What is

Floor Stripping and Sealing BRISBANE & GOLD COAST

Floor Sealing Gold Coast

Inspirations Cleaning Services offers professional tile strip and seal along with vinyl floor stripping and sealing services for customers on the Gold Coast and Brisbane. Our specialised strip and seal services help restore the shine of your flooring and protect it against stains and scratches. Sealed floors require less maintenance, and with professional strip and seal, you can help extend the lifespan of your flooring significantly. Vinyl floor stripping and sealing offer significant benefits for residents, as they can restore the lustre of dull floors. It can also enhance floor durability, protect against scratches, and act as a natural stain repellent.

Tile Floor Types Suitable for Stripping and Cleaning – Brisbane & Gold Coast

Our strip and seal services in Brisbane and the Gold Coast are suitable for a variety of hard floors, including granite, marble, sandstone, terracotta, and natural stone floors. You can opt for strip and seal embellishments for newly installed floors as well, as they are vulnerable to contamination. Tile floors with disintegrated sealants can also be stripped and cleaned before applying a new sealing solution to avoid a poor finish. Inspirations Cleaning’s expertise can also be utilised for commercial floors that endure high traffic as they benefit from a strong, scratch-resistant sealant. Public venues can also consider anti-slip sealants for extra safety.

Our tile floor stripping and sealing process on the Gold Coast and Brisbane is carried out by highly skilled technicians equipped with industry-grade tools and the appropriate stripping and sealing solutions. The service begins with the confirmation of precise measurements of the floor area. Based on these measurements, suitable floor restoration methods and sealing products are selected.

The stripping phase involves treating the floor with a stripping solution, which removes the old protective layer using specialised equipment. Following this, the surface is thoroughly cleaned using a neutraliser, rinsed with water, and allowed to dry for approximately 30 minutes. Once the floor is dry, a water-based or solvent-based sealer is applied in two to three coats, depending on the floor type. Finally, the floor is buffed with a polishing machine, resulting in a smooth and enhanced finish.

Vinyl Floor Stripping and Sealing Services – Brisbane & Gold Coast

Vinyl floors are renowned for their ability to resist scratches, dents, and stains. They are suitable in areas prone to moisture, such as kitchens and bathrooms. Despite their ruggedness, vinyl floors are subject to wear and tear which can be set right with our vinyl stripping and sealing services on the Gold Coast and Brisbane. The process of stripping and sealing vinyl floors in Brisbane involves the following steps:

The stripping process for vinyl floors begins with preparation, where the area is cleared of furniture and debris, and the floor is swept or vacuumed to remove loose dirt and dust. Next, a commercial-grade stripping solution is applied to the floor, designed to break down the old finish and any accumulated dirt or grime. Using a floor machine equipped with a scrubbing pad or brush, the stripping solution is agitated to ensure it penetrates and loosens the old finish. The solution and dissolved finish are then removed using a wet vacuum or mop, and the floor is thoroughly rinsed with clean water to eliminate any residue. Finally, the floor is allowed to dry completely before proceeding to the sealing phase.

The sealing process for vinyl floors begins with selecting an appropriate sealer, usually a water-based option due to its low odour and quick drying times. The first coat of sealer is applied using a mop or applicator designed for floor finishes, ensuring an even and thin layer to avoid streaks or bubbles. This first coat is allowed to dry completely, usually taking 30–60 minutes, depending on the product and environmental conditions. Additional coats of sealer, normally two to three, are applied following the same process, with each coat allowed to dry thoroughly before the next is applied. Once the final coat of sealer is dry, the floor can optionally be buffed with a polishing machine to enhance its shine and create a smooth finish.

Contact Inspirations Cleaning for Professional Tile Strip and Seal & Vinyl Floor Stripping and Sealing in Brisbane.

Are you interested in refurbishing your worn-out floors with our special strip and seal services on the Gold Coast? To know more please speak to our customer service executives, please call us now at 0432 593 810. You can also request a no-obligation quote by sending your requirements to saiyad.pasha@hotmail.com .